DreamBox DM7000S, satellite receiver
Home >> Dreambox >>Dreambox DM7020Si
Dreambox DM7020Si Digital Satellite Receiver
Dreambox DM7020Si Digital Satellite Receiver

Dreambox DM7020Si Digital Satellite Receiver

Special price: [ $188.00 ]
Dreambox DM7020Si Physical specification:

PACKING DETAILS
INNER BOX: 1pc/gift box
PCS/CTN: 5pcs/CTN
CTN SIZE: 580mm x430mm x 350mm
G.W: 16.1kgs/CTN

CONTAINER LOAD CAPACITY
1x20': 1370PCS
1x40': 1x40HQ

Bookmark and Share

Note:
If your shipment is delivered to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp

Dreambox500C PVR General Specifications:
ޱĵ
Dreambox DM7020Si General Specifications:

This Dreambox 7020Si digital satellite receiver with full Ethernet communication capabilities. Power PC driven with Linux operating system for endless possibilities, 250 MHz PowerPC Processor(350 Mips).

Channel-change time < 1 second
96 MByte RAM
Unlimited channel lists for TV/Radio
Integrated IDE UDMA66 Interface
Supports directly bouquet-lists
Support for internal HDD in any capacity
Full automatic service scan
Supports EPG (electronic program guide)'
Supports multiple LNB-Switching control (supports DiSEqC)
RF modulator
S/PDIF Interface for digital bit stream out (AC-3)
Supports own videotext
Audio/Video cinch out
Fully adaptable OSD in many languages and skin-support
2 x Scart-interfaces
MINI-DIN connector for extern IR (send)

DreamBox DM7020Si Parts

DBS-Tuner:

Frequency Range 950 . 2150 MHz
Signal Level - 65 dBm . - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1

Common-Interface:

Common-Interface Power Consumption max. 0,3A/5V

Output analog:

Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Video decoder:

Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device

Audio decoder:

Audiokompression MPEG-1 &mp; MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output digital:

Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

Video parameter:

Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard>

TV-Scart:

Output: FBAS,RGB,S-Video over OSD selectable

VCR-Scart:

FBAS

Mini DIN:

I2C for stearing of external devices
IR funktion

Ethernet:

10/100 MBit compatible interface
Function Update of Firmware, Connect to PC

USB:

USB 1.2 connector

Serielle Interface RS 232:

Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Pins:

5V
SDA (I2C-Kanal 2)
SCL
3,3V
GND
IR-Output
GND

LNB power and polarisation :

LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode

UDMA66 IDE Interface:

Intern for connect HDD
Compact Flash - Reader

Count of active satellite position:

DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Physical specification:

Ambient Temperature +15C...+35C
Humidity < 80%
Size (W x D x H): 374 mm x 230 mm x 75 mm
Weight: 1,8 kg without HDD

Power consumption:

< 20W (in operation, horizontal polarization / 400mA LNB current)
< 11W (in operation, without LNB)
< 4W (Deep-Standby-Mode)

Input voltage:

230V / 50 Hz alternating acurrent +/- 15%